설정상에는 문제가 없는것 같습니다.

실제 윈도우 컴퓨터의 도스창에서

c:\> nslookup piano.testtest.com
c:\> nslookup piano.testtest.com ns.hanaro.net

을 해 보세요. 제대로 도메인을 찾는지..

그리고

/usr/local/apache/logs/access_log
/usr/local/apache/logs/error_log

도 확인해 보세요 어떻게 접근하는지.


[소영]님이 남기신 글:

>언제나 감사합니다.
>차근 차근 몇일째하고 있습니다만..도저히
 모르겠습니다.
>
>정리하자면
>컴퓨터 1대에 Apache,PHP,mySQL,DNS 서버를 세팅하였습니다.

>여기까진 이상없는것 같은데
>제가가진 도메인 www.testtest.com (실제로 밝히지 못해
죄송합니다.)
>은 잘 접속되고 있습니다. 물론 네임서버는 ns.testtest.com으로
 되어 있습니다.
>(참고) DocumentRoot "/home/public_html"
>
>여기에 2차 도메인 piano.testtest.com 을 만들고  
>DocumentRoot "/home/piano/public_html"로
 따로 접속되게 하고 싶습니다.
>
>테스트를 하면 www.testtest.com 이나 www.testtest.com/~piano
>로는 접속이 잘 됩니다만
>www.testtest.com/~piano 를
>piano.testtest.com 으로도 연결되게 하고 싶습니다.
>
>어디가 잘못된것인지 고수님들 잘 좀 부탁드립니다.
>참고로 현재 세팅되어 있는 파일을
>named.conf
>testtest.zone
>222.333.444.in-addr.arpa.zone
>httpd.conf 를 아래에 올리겠습니다.
>
>******** named.conf ********
>
>## named.conf - configuration for bind
>#
># Generated automatically by bindconf, alchemist et al.
>
>controls {
>        inet 127.0.0.1 allow { localhost; } keys { rndckey; };
>};
>
>include "/etc/rndc.key";
>
>options { 
>	directory "/var/named/"; 	
>};
>
>zone  "." { 
>	type hint; 
>	file  "named.ca";
>};
>
>zone  "localhost" {
>	type master;
>	file "localhost.zone";
>};
>	
>zone  "0.0.127.in-addr.arpa" { 
>	type master; 
>	file  "0.0.127.in-addr.arpa.zone"; 
>};
>
>zone  "222.333.444.in-addr.arpa" {
>	type master;
>	file "222.333.444.in-addr.arpa.zone";
>};
>
>zone  "testtest.com" {
>	type master;
>	file "testtest.zone";
>};
>
>******** testtest.zone ********
>$TTL	86400
>@	IN	SOA	ns.testtest.com.	root.testtest.com. (
>				2004030114	; Serial
>				28800		; Refresh
>				14400		; Retry
>				3600000	; Expire
>				86400 )	; Minimum
>	IN	NS	ns.testtest.com.
>	IN	A	444.333.222.111
>www	IN	A	444.333.222.111
>piano	IN	A	444.333.222.111
>
>******** 222.333.444.in-addr.arpa.zone ********
>$TTL	86400
>@	IN	SOA	ns.testtest.com.	root.testtest.com. (
>				2004030115	; Serial
>				28800		; Refresh
>				14400		; Retry
>				3600000	; Expire
>				86400 )	; Minimum
>	IN	NS	ns.testtest.com.
>
>111	IN	PTR	testtest.com.
>111	IN	PTR	www.testtest.com.
>111	IN	PTR	piano.testtest.com.
>
>******** httpd.conf ********
>##
>## httpd.conf -- Apache HTTP server configuration file
>##
>
>#
># Based upon the NCSA server configuration files originally by Rob
McCool.
>#
># This is the main Apache server configuration file.  It contains the
># configuration directives that give the server its instructions.
># See <URL:http://www.apache.org/docs/> for detailed information
about
># the directives.
>#
># Do NOT simply read the instructions in here without understanding
># what they do.  They're here only as hints or reminders.  If you are
unsure
># consult the online docs. You have been warned.  
>#
># After this file is processed, the server will look for and process
># /usr/local/apache/conf/srm.conf and then
/usr/local/apache/conf/access.conf
># unless you have overridden these with ResourceConfig and/or
># AccessConfig directives here.
>#
># The configuration directives are grouped into three basic sections:
>#  1. Directives that control the operation of the Apache server process as
a
>#     whole (the 'global environment').
>#  2. Directives that define the parameters of the 'main' or 'default'
server,
>#     which responds to requests that aren't handled by a virtual host.
>#     These directives also provide default values for the settings
>#     of all virtual hosts.
>#  3. Settings for virtual hosts, which allow Web requests to be sent
to
>#     different IP addresses or hostnames and have them handled by the
>#     same Apache server process.
>#
># Configuration and logfile names: If the filenames you specify for
many
># of the server's control files begin with "/" (or "drive:/"
for Win32), the
># server will use that explicit path.  If the filenames do *not* begin
># with "/", the value of ServerRoot is prepended -- so
"logs/foo.log"
># with ServerRoot set to "/usr/local/apache" will be interpreted by
the
># server as "/usr/local/apache/logs/foo.log".
>#
>
>### Section 1: Global Environment
>#
># The directives in this section affect the overall operation of
Apache,
># such as the number of concurrent requests it can handle or where it
># can find its configuration files.
>#
>
>#
># ServerType is either inetd, or standalone.  Inetd mode is only supported
on
># Unix platforms.
>#
>ServerType standalone
>
>#
># ServerRoot: The top of the directory tree under which the server's
># configuration, error, and log files are kept.
>#
># NOTE!  If you intend to place this on an NFS (or otherwise network)
># mounted filesystem then please read the LockFile documentation
># (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
># you will save yourself a lot of trouble.
>#
>ServerRoot "/usr/local/apache"
>
>#
># The LockFile directive sets the path to the lockfile used when Apache
># is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
># USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left
at
># its default value. The main reason for changing it is if the logs
># directory is NFS mounted, since the lockfile MUST BE STORED ON A
LOCAL
># DISK. The PID of the main server process is automatically appended to
># the filename. 
>#
>#LockFile /usr/local/apache/logs/httpd.lock
>
>#
># PidFile: The file in which the server should record its process
># identification number when it starts.
>#
>PidFile /usr/local/apache/logs/httpd.pid
>
>#
># ScoreBoardFile: File used to store internal server process
information.
># Not all architectures require this.  But if yours does (you'll know
because
># this file will be  created when you run Apache) then you *must* ensure
that
># no two invocations of Apache share the same scoreboard file.
>#
>ScoreBoardFile /usr/local/apache/logs/httpd.scoreboard
>
>#
># In the standard configuration, the server will process httpd.conf (this

># file, specified by the -f command line option), srm.conf, and access.conf

># in that order.  The latter two files are now distributed empty, as it is

># recommended that all directives be kept in a single file for simplicity. 

># The commented-out values below are the built-in defaults.  You can have the

># server ignore these files altogether by using "/dev/null" (for Unix)
or
># "nul" (for Win32) for the arguments to the directives.
>#
>#ResourceConfig /usr/local/apache/conf/srm.conf
>#AccessConfig /usr/local/apache/conf/access.conf
>
>#
># Timeout: The number of seconds before receives and sends time out.
>#
>Timeout 300
>
>#
># KeepAlive: Whether or not to allow persistent connections (more than
># one request per connection). Set to "Off" to deactivate.
>#
>KeepAlive On
>
>#
># MaxKeepAliveRequests: The maximum number of requests to allow
># during a persistent connection. Set to 0 to allow an unlimited
amount.
># We recommend you leave this number high, for maximum performance.
>#
>MaxKeepAliveRequests 100
>
>#
># KeepAliveTimeout: Number of seconds to wait for the next request from
the
># same client on the same connection.
>#
>KeepAliveTimeout 15
>
>#
># Server-pool size regulation.  Rather than making you guess how many
># server processes you need, Apache dynamically adapts to the load it
># sees --- that is, it tries to maintain enough server processes to
># handle the current load, plus a few spare servers to handle transient
># load spikes (e.g., multiple simultaneous requests from a single
># Netscape browser).
>#
># It does this by periodically checking how many servers are waiting
># for a request.  If there are fewer than MinSpareServers, it creates
># a new spare.  If there are more than MaxSpareServers, some of the
># spares die off.  The default values are probably OK for most sites.
>#
>MinSpareServers 5
>MaxSpareServers 10
>
>#
># Number of servers to start initially --- should be a reasonable
ballpark
># figure.
>#
>StartServers 5
>
>#
># Limit on total number of servers running, i.e., limit on the number
># of clients who can simultaneously connect --- if this limit is ever
># reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
># It is intended mainly as a brake to keep a runaway server from taking
># the system with it as it spirals down...
>#
>MaxClients 150
>
>#
># MaxRequestsPerChild: the number of requests each child process is
># allowed to process before the child dies.  The child will exit so
># as to avoid problems after prolonged use when Apache (and maybe the
># libraries it uses) leak memory or other resources.  On most systems,
this
># isn't really needed, but a few (such as Solaris) do have notable
leaks
># in the libraries. For these platforms, set to something like 10000
># or so; a setting of 0 means unlimited.
>#
># NOTE: This value does not include keepalive requests after the
initial
>#       request per connection. For example, if a child process handles
>#       an initial request and 10 subsequent "keptalive" requests,
it
>#       would only count as 1 request towards this limit.
>#
>MaxRequestsPerChild 0
>
>#
># Listen: Allows you to bind Apache to specific IP addresses and/or
># ports, instead of the default. See also the <VirtualHost>
># directive.
>#
>#Listen 3000
>#Listen 12.34.56.78:80
>
>#
># BindAddress: You can support virtual hosts with this option. This
directive
># is used to tell the server which IP address to listen to. It can
either
># contain "*", an IP address, or a fully qualified Internet domain
name.
># See also the <VirtualHost> and Listen directives.
>#
>BindAddress *
>
>#
># Dynamic Shared Object (DSO) Support
>#
># To be able to use the functionality of a module which was built as a DSO
you
># have to place corresponding `LoadModule' lines at this location so
the
># directives contained in it are actually available _before_ they are
used.
># Please read the file http://httpd.apache.org/docs/dso.html for more
># details about the DSO mechanism and run `httpd -l' for the list of
already
># built-in (statically linked and thus always available) modules in your
httpd
># binary.
>#
># Note: The order in which modules are loaded is important.  Don't
change
># the order below without expert advice.
>#
># Example:
># LoadModule foo_module libexec/mod_foo.so
>
>#
># ExtendedStatus controls whether Apache will generate "full"
status
># information (ExtendedStatus On) or just basic information
(ExtendedStatus
># Off) when the "server-status" handler is called. The default is
Off.
>#
>#ExtendedStatus On
>
>### Section 2: 'Main' server configuration
>#
># The directives in this section set up the values used by the 'main'
># server, which responds to any requests that aren't handled by a
># <VirtualHost> definition.  These values also provide defaults for
># any <VirtualHost> containers you may define later in the file.
>#
># All of these directives may appear inside <VirtualHost>
containers,
># in which case these default settings will be overridden for the
># virtual host being defined.
>#
>
>#
># If your ServerType directive (set earlier in the 'Global Environment'
># section) is set to "inetd", the next few directives don't have
any
># effect since their settings are defined by the inetd configuration.
># Skip ahead to the ServerAdmin directive.
>#
>
>#
># Port: The port to which the standalone server listens. For
># ports < 1023, you will need httpd to be run as root initially.
>#
>Port 80
>
>#
># If you wish httpd to run as a different user or group, you must run
># httpd as root initially and it will switch.  
>#
># User/Group: The name (or #number) of the user/group to run httpd as.
>#  . On SCO (ODT 3) use "User nouser" and "Group
nogroup".
>#  . On HPUX you may not be able to use shared memory as nobody, and
the
>#    suggested workaround is to create a user www and use that user.
>#  NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
>#  when the value of (unsigned)Group is above 60000; 
>#  don't use Group "#-1" on these systems!
>#
>User nobody
>Group nobody
>
>#
># ServerAdmin: Your address, where problems with the server should be
># e-mailed.  This address appears on some server-generated pages, such
># as error documents.
>#
>ServerAdmin root@localhost.localdomain
>
>#
># ServerName allows you to set a host name which is sent back to clients
for
># your server if it's different than the one the program would get (i.e.,
use
># "www" instead of the host's real name).
>#
># Note: You cannot just invent host names and hope they work. The name you

># define here must be a valid DNS name for your host. If you don't
understand
># this, ask your network administrator.
># If your host doesn't have a registered DNS name, enter its IP address
here.
># You will have to access it by its address (e.g., http://123.45.67.89/)
># anyway, and this will make redirections work in a sensible way.
>#
># 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your

># machine always knows itself by this address. If you use Apache strictly for

># local testing and development, you may use 127.0.0.1 as the server
name.
>#
>ServerName www.testtest.com
>
>#
># DocumentRoot: The directory out of which you will serve your
># documents. By default, all requests are taken from this directory,
but
># symbolic links and aliases may be used to point to other locations.
>#
>DocumentRoot "/home/public_html"
>#DocumentRoot "/usr/local/apache/htdocs"
>#
># Each directory to which Apache has access, can be configured with
respect
># to which services and features are allowed and/or disabled in that
># directory (and its subdirectories). 
>#
># First, we configure the "default" to be a very restrictive set of

># permissions.  
>#
><Directory />
>    Options FollowSymLinks
>    AllowOverride None
></Directory>
>
>#
># Note that from this point forward you must specifically allow
># particular features to be enabled - so if something's not working as
># you might expect, make sure that you have specifically enabled it
># below.
>#
>
>#
># This should be changed to whatever you set DocumentRoot to.
>#
><Directory "/usr/local/apache/htdocs">
>
>#
># This may also be "None", "All", or any combination of
"Indexes",
># "Includes", "FollowSymLinks", "ExecCGI", or
"MultiViews".
>#
># Note that "MultiViews" must be named *explicitly* --- "Options
All"
># doesn't give it to you.
>#
>    Options Indexes FollowSymLinks MultiViews
>
>#
># This controls which options the .htaccess files in directories can
># override. Can also be "All", or any combination of "Options",
"FileInfo", 
># "AuthConfig", and "Limit"
>#
>    AllowOverride None
>
>#
># Controls who can get stuff from this server.
>#
>    Order allow,deny
>    Allow from all
></Directory>
>
>#
># UserDir: The name of the directory which is appended onto a user's
home
># directory if a ~user request is received.
>#
><IfModule mod_userdir.c>
>    UserDir public_html
></IfModule>
>
>#
># Control access to UserDir directories.  The following is an example
># for a site where these directories are restricted to read-only.
>#
>#<Directory /home/*/public_html>
>#    AllowOverride FileInfo AuthConfig Limit
>#    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
>#    <Limit GET POST OPTIONS PROPFIND>
>#        Order allow,deny
>#        Allow from all
>#    </Limit>
>#    <LimitExcept GET POST OPTIONS PROPFIND>
>#        Order deny,allow
>#        Deny from all
>#    </LimitExcept>
>#</Directory>
>
>#
># DirectoryIndex: Name of the file or files to use as a pre-written
HTML
># directory index.  Separate multiple entries with spaces.
>#
><IfModule mod_dir.c>
>    DirectoryIndex index.php index.html index.htm
></IfModule>
>
>#
># AccessFileName: The name of the file to look for in each directory
># for access control information.
>#
>AccessFileName .htaccess
>
>#
># The following lines prevent .htaccess files from being viewed by
># Web clients.  Since .htaccess files often contain authorization
># information, access is disallowed for security reasons.  Comment
># these lines out if you want Web visitors to see the contents of
># .htaccess files.  If you change the AccessFileName directive above,
># be sure to make the corresponding changes here.
>#
># Also, folks tend to use names such as .htpasswd for password
># files, so this will protect those as well.
>#
><Files ~ "^\.ht">
>    Order allow,deny
>    Deny from all
>    Satisfy All
></Files>
>
>#
># CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with
each
># document that was negotiated on the basis of content. This asks proxy
># servers not to cache the document. Uncommenting the following line
disables
># this behavior, and proxies will be allowed to cache the documents.
>#
>#CacheNegotiatedDocs
>
>#
># UseCanonicalName:  (new for 1.3)  With this setting turned on,
whenever
># Apache needs to construct a self-referencing URL (a URL that refers
back
># to the server the response is coming from) it will use ServerName and
># Port to form a "canonical" name.  With this setting off, Apache
will
># use the hostname:port that the client supplied, when possible.  This
># also affects SERVER_NAME and SERVER_PORT in CGI scripts.
>#
>UseCanonicalName On
>
>#
># TypesConfig describes where the mime.types file (or equivalent) is
># to be found.
>#
><IfModule mod_mime.c>
>    TypesConfig /usr/local/apache/conf/mime.types
></IfModule>
>
>#
># DefaultType is the default MIME type the server will use for a
document
># if it cannot otherwise determine one, such as from filename
extensions.
># If your server contains mostly text or HTML documents, "text/plain"
is
># a good value.  If most of your content is binary, such as
applications
># or images, you may want to use "application/octet-stream" instead
to
># keep browsers from trying to display binary files as though they are
># text.
>#
>DefaultType text/plain
>
>#
># The mod_mime_magic module allows the server to use various hints from
the
># contents of the file itself to determine its type.  The MIMEMagicFile
># directive tells the module where the hint definitions are located.
># mod_mime_magic is not part of the default server (you have to add
># it yourself with a LoadModule [see the DSO paragraph in the 'Global
># Environment' section], or recompile the server and include
mod_mime_magic
># as part of the configuration), so it's enclosed in an <IfModule>
container.
># This means that the MIMEMagicFile directive will only be processed if
the
># module is part of the server.
>#
><IfModule mod_mime_magic.c>
>    MIMEMagicFile /usr/local/apache/conf/magic
></IfModule>
>
>#
># HostnameLookups: Log the names of clients or just their IP addresses
># e.g., www.apache.org (on) or 204.62.129.132 (off).
># The default is off because it'd be overall better for the net if
people
># had to knowingly turn this feature on, since enabling it means that
># each client request will result in AT LEAST one lookup request to the
># nameserver.
>#
>HostnameLookups Off
>
>#
># ErrorLog: The location of the error log file.
># If you do not specify an ErrorLog directive within a <VirtualHost>
># container, error messages relating to that virtual host will be
># logged here.  If you *do* define an error logfile for a
<VirtualHost>
># container, that host's errors will be logged there and not here.
>#
>ErrorLog /usr/local/apache/logs/error_log
>
>#
># LogLevel: Control the number of messages logged to the error_log.
># Possible values include: debug, info, notice, warn, error, crit,
># alert, emerg.
>#
>LogLevel warn
>
>#
># The following directives define some format nicknames for use with
># a CustomLog directive (see below).
>#
>LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\"
\"%{User-Agent}i\"" combined
>LogFormat "%h %l %u %t \"%r\" %>s %b" common
>LogFormat "%{Referer}i -> %U" referer
>LogFormat "%{User-agent}i" agent
>
>#
># The location and format of the access logfile (Common Logfile
Format).
># If you do not define any access logfiles within a <VirtualHost>
># container, they will be logged here.  Contrariwise, if you *do*
># define per-<VirtualHost> access logfiles, transactions will be
># logged therein and *not* in this file.
>#
>CustomLog /usr/local/apache/logs/access_log common
>
>#
># If you would like to have agent and referer logfiles, uncomment the
># following directives.
>#
>#CustomLog /usr/local/apache/logs/referer_log referer
>#CustomLog /usr/local/apache/logs/agent_log agent
>
>#
># If you prefer a single logfile with access, agent, and referer
information
># (Combined Logfile Format) you can use the following directive.
>#
>#CustomLog /usr/local/apache/logs/access_log combined
>
>#
># Optionally add a line containing the server version and virtual host
># name to server-generated pages (error documents, FTP directory
listings,
># mod_status and mod_info output etc., but not CGI generated
documents).
># Set to "EMail" to also include a mailto: link to the
ServerAdmin.
># Set to one of:  On | Off | EMail
>#
>ServerSignature On
>
># EBCDIC configuration:
># (only for mainframes using the EBCDIC codeset, currently one of:
># Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!!
># The following default configuration assumes that "text
files"
># are stored in EBCDIC (so that you can operate on them using the
># normal POSIX tools like grep and sort) while "binary files"
are
># stored with identical octets as on an ASCII machine.
>#
># The directives are evaluated in configuration file order, with
># the EBCDICConvert directives applied before EBCDICConvertByType.
>#
># If you want to have ASCII HTML documents and EBCDIC HTML documents
># at the same time, you can use the file extension to force
># conversion off for the ASCII documents:
># > AddType       text/html .ahtml
># > EBCDICConvert Off=InOut .ahtml
>#
># EBCDICConvertByType  On=InOut text/* message/* multipart/*
># EBCDICConvertByType  On=In    application/x-www-form-urlencoded
># EBCDICConvertByType  On=InOut application/postscript model/vrml
># EBCDICConvertByType Off=InOut */*
>
>
>#
># Aliases: Add here as many aliases as you need (with no limit). The format is

># Alias fakename realname
>#
><IfModule mod_alias.c>
>
>    #
>    # Note that if you include a trailing / on fakename then the server
will
>    # require it to be present in the URL.  So "/icons" isn't aliased in
this
>    # example, only "/icons/".  If the fakename is slash-terminated, then
the 
>    # realname must also be slash terminated, and if the fakename omits the

>    # trailing slash, the realname must also omit it.
>    #
>    Alias /icons/ "/usr/local/apache/icons/"
>
>    <Directory "/usr/local/apache/icons">
>        Options Indexes MultiViews
>        AllowOverride None
>        Order allow,deny
>        Allow from all
>    </Directory>
>
>    # This Alias will project the on-line documentation tree under
/manual/
>    # even if you change the DocumentRoot. Comment it if you don't want to

>    # provide access to the on-line documentation.
>    #
>    Alias /manual/ "/usr/local/apache/htdocs/manual/"
>
>    <Directory "/usr/local/apache/htdocs/manual">
>        Options Indexes FollowSymlinks MultiViews
>        AllowOverride None
>        Order allow,deny
>        Allow from all
>    </Directory>
>
>    #
>    # ScriptAlias: This controls which directories contain server
scripts.
>    # ScriptAliases are essentially the same as Aliases, except that
>    # documents in the realname directory are treated as applications
and
>    # run by the server when requested rather than as documents sent to the
client.
>    # The same rules about trailing "/" apply to ScriptAlias directives
as to
>    # Alias.
>    #
>    ScriptAlias /cgi-bin/ "/usr/local/apache/cgi-bin/"
>
>    #
>    # "/usr/local/apache/cgi-bin" should be changed to whatever your
ScriptAliased
>    # CGI directory exists, if you have that configured.
>    #
>    <Directory "/usr/local/apache/cgi-bin">
>        AllowOverride None
>        Options None
>        Order allow,deny
>        Allow from all
>    </Directory>
>
></IfModule>
># End of aliases.
>
>#
># Redirect allows you to tell clients about documents which used to exist
in
># your server's namespace, but do not anymore. This allows you to tell
the
># clients where to look for the relocated document.
># Format: Redirect old-URI new-URL
>#
>
>#
># Directives controlling the display of server-generated directory
listings.
>#
><IfModule mod_autoindex.c>
>
>    #
>    # FancyIndexing is whether you want fancy directory indexing or
standard
>    #
>    IndexOptions FancyIndexing
>
>    #
>    # AddIcon* directives tell the server which icon to show for
different
>    # files or filename extensions.  These are only displayed for
>    # FancyIndexed directories.
>    #
>    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
>
>    AddIconByType (TXT,/icons/text.gif) text/*
>    AddIconByType (IMG,/icons/image2.gif) image/*
>    AddIconByType (SND,/icons/sound2.gif) audio/*
>    AddIconByType (VID,/icons/movie.gif) video/*
>
>    AddIcon /icons/binary.gif .bin .exe
>    AddIcon /icons/binhex.gif .hqx
>    AddIcon /icons/tar.gif .tar
>    AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
>    AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
>    AddIcon /icons/a.gif .ps .ai .eps
>    AddIcon /icons/layout.gif .html .shtml .htm .pdf
>    AddIcon /icons/text.gif .txt
>    AddIcon /icons/c.gif .c
>    AddIcon /icons/p.gif .pl .py
>    AddIcon /icons/f.gif .for
>    AddIcon /icons/dvi.gif .dvi
>    AddIcon /icons/uuencoded.gif .uu
>    AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
>    AddIcon /icons/tex.gif .tex
>    AddIcon /icons/bomb.gif core
>
>    AddIcon /icons/back.gif ..
>    AddIcon /icons/hand.right.gif README
>    AddIcon /icons/folder.gif ^^DIRECTORY^^
>    AddIcon /icons/blank.gif ^^BLANKICON^^
>
>    #
>    # DefaultIcon is which icon to show for files which do not have an
icon
>    # explicitly set.
>    #
>    DefaultIcon /icons/unknown.gif
>
>    #
>    # AddDescription allows you to place a short description after a file
in
>    # server-generated indexes.  These are only displayed for
FancyIndexed
>    # directories.
>    # Format: AddDescription "description" filename
>    #
>    #AddDescription "GZIP compressed document" .gz
>    #AddDescription "tar archive" .tar
>    #AddDescription "GZIP compressed tar archive" .tgz
>
>    #
>    # ReadmeName is the name of the README file the server will look for
by
>    # default, and append to directory listings.
>    #
>    # HeaderName is the name of a file which should be prepended to
>    # directory indexes. 
>    #
>    ReadmeName README
>    HeaderName HEADER
>
>    #
>    # IndexIgnore is a set of filenames which directory indexing should
ignore
>    # and not include in the listing.  Shell-style wildcarding is
permitted.
>    #
>    IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
>
></IfModule>
># End of indexing directives.
>
>#
># Document types.
>#
><IfModule mod_mime.c>
>
>    #
>    # AddLanguage allows you to specify the language of a document. You
can
>    # then use content negotiation to give a browser a file in a
language
>    # it can understand.  
>    #
>    # Note 1: The suffix does not have to be the same as the language 
>    # keyword --- those with documents in Polish (whose net-standard 
>    # language code is pl) may wish to use "AddLanguage pl .po" to

>    # avoid the ambiguity with the common suffix for perl scripts.
>    #
>    # Note 2: The example entries below illustrate that in quite
>    # some cases the two character 'Language' abbreviation is not
>    # identical to the two character 'Country' code for its country,
>    # E.g. 'Danmark/dk' versus 'Danish/da'.
>    #
>    # Note 3: In the case of 'ltz' we violate the RFC by using a three char

>    # specifier. But there is 'work in progress' to fix this and get 
>    # the reference data for rfc1766 cleaned up.
>    #
>    # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
>    # French (fr) - German (de) - Greek-Modern (el)
>    # Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk
(nn)
>    # Portugese (pt) - Luxembourgeois* (ltz)
>    # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cs)
>    # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
>    # Russian (ru)
>    #
>    AddLanguage da .dk
>    AddLanguage nl .nl
>    AddLanguage en .en
>    AddLanguage et .ee
>    AddLanguage fr .fr
>    AddLanguage de .de
>    AddLanguage el .el
>    AddLanguage he .he
>    AddCharset ISO-8859-8 .iso8859-8
>    AddLanguage it .it
>    AddLanguage ja .ja
>    AddCharset ISO-2022-JP .jis
>    AddLanguage kr .kr
>    AddCharset ISO-2022-KR .iso-kr
>    AddLanguage nn .nn
>    AddLanguage no .no
>    AddLanguage pl .po
>    AddCharset ISO-8859-2 .iso-pl
>    AddLanguage pt .pt
>    AddLanguage pt-br .pt-br
>    AddLanguage ltz .lu
>    AddLanguage ca .ca
>    AddLanguage es .es
>    AddLanguage sv .sv
>    AddLanguage cs .cz .cs
>    AddLanguage ru .ru
>    AddLanguage zh-TW .zh-tw
>    AddCharset Big5         .Big5    .big5
>    AddCharset WINDOWS-1251 .cp-1251
>    AddCharset CP866        .cp866
>    AddCharset ISO-8859-5   .iso-ru
>    AddCharset KOI8-R       .koi8-r
>    AddCharset UCS-2        .ucs2
>    AddCharset UCS-4        .ucs4
>    AddCharset UTF-8        .utf8
>
>    # LanguagePriority allows you to give precedence to some languages
>    # in case of a tie during content negotiation.
>    #
>    # Just list the languages in decreasing order of preference. We
have
>    # more or less alphabetized them here. You probably want to change
this.
>    #
>    <IfModule mod_negotiation.c>
>        LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es
sv tw
>    </IfModule>
>
>    #
>    # AddType allows you to tweak mime.types without actually editing it, or
to
>    # make certain files to be certain types.
>    #
>    AddType application/x-tar .tgz
>    AddType application/x-httpd-php .html .htm .inc .php .php3
>    Action application/x-httpd-php-source .phps
>    #
>    # AddEncoding allows you to have certain browsers uncompress
>    # information on the fly. Note: Not all browsers support this.
>    # Despite the name similarity, the following Add* directives have
nothing
>    # to do with the FancyIndexing customization directives above.
>    #
>    AddEncoding x-compress .Z
>    AddEncoding x-gzip .gz .tgz
>    #
>    # If the AddEncoding directives above are commented-out, then you
>    # probably should define those extensions to indicate media types:
>    #
>    #AddType application/x-compress .Z
>    #AddType application/x-gzip .gz .tgz
>
>    #
>    # AddHandler allows you to map certain file extensions to
"handlers",
>    # actions unrelated to filetype. These can be either built into the
server
>    # or added with the Action command (see below)
>    #
>    # If you want to use server side includes, or CGI outside
>    # ScriptAliased directories, uncomment the following lines.
>    #
>    # To use CGI scripts:
>    #
>    #AddHandler cgi-script .cgi
>
>    #
>    # To use server-parsed HTML files
>    #
>    #AddType text/html .shtml
>    #AddHandler server-parsed .shtml
>
>    #
>    # Uncomment the following line to enable Apache's send-asis HTTP
file
>    # feature
>    #
>    #AddHandler send-as-is asis
>
>    #
>    # If you wish to use server-parsed imagemap files, use
>    #
>    #AddHandler imap-file map
>
>    #
>    # To enable type maps, you might want to use
>    #
>    #AddHandler type-map var
>
></IfModule>
># End of document types.
>
>#
># Action lets you define media types that will execute a script
whenever
># a matching file is called. This eliminates the need for repeated URL
># pathnames for oft-used CGI file processors.
># Format: Action media/type /cgi-script/location
># Format: Action handler-name /cgi-script/location
>#
>
>#
># MetaDir: specifies the name of the directory in which Apache can find
># meta information files. These files contain additional HTTP headers
># to include when sending the document
>#
>#MetaDir .web
>
>#
># MetaSuffix: specifies the file name suffix for the file containing
the
># meta information.
>#
>#MetaSuffix .meta
>
>#
># Customizable error response (Apache style)
>#  these come in three flavors
>#
>#    1) plain text
>#ErrorDocument 500 "The server made a boo boo.
>#  n.b.  the single leading (") marks it as text, it does not get
output
>#
>#    2) local redirects
>#ErrorDocument 404 /missing.html
>#  to redirect to local URL /missing.html
>#ErrorDocument 404 /cgi-bin/missing_handler.pl
>#  N.B.: You can redirect to a script or a document using
server-side-includes.
>#
>#    3) external redirects
>#ErrorDocument 402 http://www.example.com/subscription_info.html
>#  N.B.: Many of the environment variables associated with the original
>#  request will *not* be available to such a script.
>
>#
># Customize behaviour based on the browser
>#
><IfModule mod_setenvif.c>
>
>    #
>    # The following directives modify normal HTTP response behavior.
>    # The first directive disables keepalive for Netscape 2.x and browsers
that
>    # spoof it. There are known problems with these browser
implementations.
>    # The second directive is for Microsoft Internet Explorer 4.0b2
>    # which has a broken HTTP/1.1 implementation and does not properly
>    # support keepalive when it is used on 301 or 302 (redirect)
responses.
>    #
>    BrowserMatch "Mozilla/2" nokeepalive
>    BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0
force-response-1.0
>
>    #
>    # The following directive disables HTTP/1.1 responses to browsers
which
>    # are in violation of the HTTP/1.0 spec by not being able to grok a
>    # basic 1.1 response.
>    #
>    BrowserMatch "RealPlayer 4\.0" force-response-1.0
>    BrowserMatch "Java/1\.0" force-response-1.0
>    BrowserMatch "JDK/1\.0" force-response-1.0
>
></IfModule>
># End of browser customization directives
>
>#
># Allow server status reports, with the URL of
http://servername/server-status
># Change the ".example.com" to match your domain to enable.
>#
>#<Location /server-status>
>#    SetHandler server-status
>#    Order deny,allow
>#    Deny from all
>#    Allow from .example.com
>#</Location>
>
>#
># Allow remote server configuration reports, with the URL of
># http://servername/server-info (requires that mod_info.c be loaded).
># Change the ".example.com" to match your domain to enable.
>#
>#<Location /server-info>
>#    SetHandler server-info
>#    Order deny,allow
>#    Deny from all
>#    Allow from .example.com
>#</Location>
>
>#
># There have been reports of people trying to abuse an old bug from
pre-1.1
># days.  This bug involved a CGI script distributed as a part of
Apache.
># By uncommenting these lines you can redirect these attacks to a logging

># script on phf.apache.org.  Or, you can record them yourself, using the
script
># support/phf_abuse_log.cgi.
>#
>#<Location /cgi-bin/phf*>
>#    Deny from all
>#    ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
>#</Location>
>
>### Section 3: Virtual Hosts
>#
># VirtualHost: If you want to maintain multiple domains/hostnames on
your
># machine you can setup VirtualHost containers for them. Most
configurations
># use only name-based virtual hosts so the server doesn't need to worry
about
># IP addresses. This is indicated by the asterisks in the directives
below.
>#
># Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
># for further details before you try to setup virtual hosts.
>#
># You may use the command line option '-S' to verify your virtual host
># configuration.
>
>#
># Use name-based virtual hosting.
>#
>NameVirtualHost 444.333.222.111
>
>#
># VirtualHost example:
># Almost any Apache directive may go into a VirtualHost container.
># The first VirtualHost section is used for requests without a known
># server name.
>#
><VirtualHost 444.333.222.111>
>    ServerAdmin testtest@empal.com
>    DocumentRoot /home/public_html
>    ServerName www.testtest.com
>#    ErrorLog logs/dummy-host.example.com-error_log
>#    CustomLog logs/dummy-host.example.com-access_log common
></VirtualHost>
>
><VirtualHost 444.333.222.111>
>    ServerAdmin testtest@empal.com
>    DocumentRoot /home/piano/public_html
>    ServerName piano.testtest.com
></VirtualHost> 

========================================